Overview
The Fujiya KUROKIN Through-Tang Strike Cap Screwdriver is designed for installation, maintenance, and general service work where screws are rusted, seized, or stripped. The steel shaft runs through the handle to a large gold-plated strike nut, so hammer blows go straight to the tip to help break loose stubborn fasteners.
The 5.9" (150 mm) Si-Cr-V steel shaft gives good reach into boxes and equipment, and the large 1.6" (40 mm) cushion grip supports strong torque and comfortable repeated use. A magnetized black point tip helps hold screws during placement. Available in Phillips (+2) and Slotted (-6). Made in Japan.
Important: This is not a voltage-rated insulated screwdriver. It is not certified to IEC 60900 / VDE 1000V and is not intended for use on energized circuits. Always disconnect power and verify the circuit is de-energized with a tester before use. Fujiya notes that if the ceramic section is damaged or moisture enters the tool, electrical conduction may occur.
Want a ceramic-break version? See the Fujiya Strike Cap Screwdriver (526SK-BG/566SK-BG).
✅ Full through-tang steel shaft transfers hammer blows straight to the tip
✅ Large gold-plated strike nut for controlled hammer strikes
✅ Helps break loose rusted, seized, and stripped screws
✅ 5.9" shaft reaches comfortably into boxes and equipment
✅ Large cushion grip provides strong torque and control
✅ Magnetized black point tip helps hold fasteners during placement
Features
- Through-tang strike cap screwdriver for installation, maintenance, and service work
- Steel shaft runs through the handle to a large gold-plated strike nut
- Hammer blows transfer directly to the tip to loosen seized fasteners
- Si-Cr-V alloy steel shaft
- Magnetized black point tip improves screw control
- Large 1.6" (40 mm) cushion grip supports torque and repeated strikes
- KUROKIN black-and-gold finish for jobsite durability
- Not insulated and electrically conductive end to end; see Product Safety below
- Made in Japan by Fujiya (est. 1923)
Details
| Specification |
Phillips (+2) |
Slotted (-6) |
| Model |
526K-BG |
566K-BG |
| Tool Type |
Through-Tang Screwdriver with Strike Cap |
Through-Tang Screwdriver with Strike Cap |
| Tip Type |
Phillips +2 |
Slotted -6 |
| Shaft Length |
5.9" (150 mm) |
5.9" (150 mm) |
| Overall Length |
9.3" (236 mm) |
9.3" (236 mm) |
| Weight |
4.9 oz (140 g) |
4.9 oz (139 g) |
| Shaft Diameter |
0.24" (6 mm) |
0.24" (6 mm) |
| Grip Diameter |
1.6" (40 mm) |
1.6" (40 mm) |
| Shaft Material |
Si-Cr-V steel |
Si-Cr-V steel |
| Strike Cap |
Gold-plated steel nut |
Gold-plated steel nut |
| Insulated |
No (through-tang) |
No (through-tang) |
| JAN Code |
4952520403280 |
4952520403266 |
| Country of Origin |
Made in Japan |
Made in Japan |
Product Safety
- Always wear appropriate personal protective equipment (PPE), such as gloves and safety glasses, when using tools.
- Wear safety glasses when striking, cutting, or prying with any tool.
- Inspect each tool before use and do not operate if damaged.
- Use all tools only for their intended purpose and within their specified limits.
- Do not use on live electrical circuits unless the tool is certified to IEC 60900 / VDE 1000V and marked accordingly.
- Only tools carrying that certification are rated for work near energized conductors.
- A plastic handle, resin shaft cover, or internal insulating component is not electrical insulation and will not protect you from shock.
- Always disconnect power and verify the circuit is de-energized with a tester before working on electrical equipment.
- Store tools in a dry location and keep them out of reach of children.
Shipping
Ships from: Vancouver, Canada
For full details on delivery options, transit times, and carriers, please see our [Shipping Policy]
Returns & Exchanges:
We accept returns within 30 days of delivery if items are unused and in original condition. For full instructions, visit our [Refund Policy]
