Overview
The Fujiya KUROKIN Strike-Cap Screwdriver is designed for electrical installation, maintenance, and general service work where screws may be tight, seized, or difficult to start. Its rear steel strike cap allows tapping with a hammer to loosen stubborn fasteners in panels and electrical hardware, and the compact 3.9" (100 mm) shaft keeps it easy to control in tight spaces.
Inside the handle, Fujiya uses a high-strength zirconia ceramic section that interrupts the direct metallic path between the screwdriver shaft and rear strike cap. This provides an added safety measure compared with conventional through-tang screwdrivers while maintaining durability for controlled striking.
The large cushion grip supports strong torque and comfortable repeated use, while the magnetized tip helps hold screws during placement. Available in Phillips (+2) and Slotted (-6). Made in Japan.
Important: This is not a voltage-rated insulated screwdriver. It is not certified to IEC 60900 / VDE 1000V and is not intended for use on energized circuits. Always disconnect power and verify the circuit is de-energized with a tester before use. Fujiya notes that if the ceramic section is damaged or moisture enters the tool, electrical conduction may occur.
Want more reach? See the 9.3" Fujiya Strike Cap Screwdriver (526SK-BG/566SK-BG).
✅ Steel strike cap allows controlled hammer blows to help loosen seized screws
✅ Zirconia ceramic section interrupts the direct metallic path between the shaft and strike cap
✅ Compact 3.9" shaft for control in tight boxes and panels
✅ Large cushion grip provides strong torque and control
✅ Magnetized tip helps hold fasteners during placement
✅ Made in Japan
Features
- Ceramic strike-cap screwdriver for installation, maintenance, and service work
- Steel strike cap transfers impact to help break loose seized fasteners
- Internal high-strength zirconia ceramic section inside the handle
- Magnetized tip improves screw control during installation
- Large cushion grip supports torque and repeated hammer strikes
- KUROKIN black-and-gold finish for jobsite durability
- Not insulated; see Product Safety below
- Made in Japan and hand-finished by Fujiya craftsmen (est. 1923)
Details
| Specification |
Phillips (+2) |
Slotted (-6) |
| Model |
524SK-BG |
564SK-BG |
| Tool Type |
Screwdriver with Strike Cap |
Screwdriver with Strike Cap |
| Tip Type |
Phillips +2 |
Slotted -6 |
| Shaft Length |
3.9" (100 mm) |
3.9" (100 mm) |
| Overall Length |
7.3" (186 mm) |
7.3" (186 mm) |
| Weight |
5.2 oz (148 g) |
5.2 oz (148 g) |
| Shaft Diameter |
0.25" (6.4 mm) |
0.25" (6.4 mm) |
| Strike Cap |
Steel |
Steel |
| Insulated |
No |
No |
| JAN Code |
4952520403334 |
4952520403358 |
| Country of Origin |
Made in Japan |
Made in Japan |
Product Safety
- Always wear appropriate personal protective equipment (PPE), such as gloves and safety glasses, when using tools.
- Wear safety glasses when striking, cutting, or prying with any tool.
- Inspect each tool before use and do not operate if damaged.
- Use all tools only for their intended purpose and within their specified limits.
- Do not use on live electrical circuits unless the tool is certified to IEC 60900 / VDE 1000V and marked accordingly.
- Only tools carrying that certification are rated for work near energized conductors.
- A plastic handle, resin shaft cover, or internal insulating component is not electrical insulation and will not protect you from shock.
- Always disconnect power and verify the circuit is de-energized with a tester before working on electrical equipment.
- Store tools in a dry location and keep them out of reach of children.
Shipping
Ships from: Vancouver, Canada
For full details on delivery options, transit times, and carriers, please see our [Shipping Policy]
Returns & Exchanges:
We accept returns within 30 days of delivery if items are unused and in original condition. For full instructions, visit our [Refund Policy]
